1-Touch Tension System
Wikiscootia has moved
Due to a change in the approach that Wikiscootia is maintained, the site has moved to a new system. The new scooter wiki can be found at [http://en.scooter.wikia.com/wiki]. We apologize for any inconvenience.
- Puller bolt
- Tension arm
- Transmission
- Drive belt
- Scooter deck
- Scooter frame
The Puzey 1-touch tension system is based on a simple bolt and lever design. By tightening a bolt on the bottom of the scooter, a lever is pulled which in turn pulls the drive belt tighter. Because of this simple design, the tension of the drive belt can be adjusted with one hand with either a screw driver or a 13mm wrench.
This tension system can be found on the Evo 2x, 2, SPX and R.
